Description
Hardware configuration
M.2 / NGFF module adapter with a Mini PCIe edge connection. Use this page to select an adapter or assembled modem for evaluation and host integration. Confirm the board and modem configuration with your quotation.
Photographs and supplied items
The main photograph shows an unpopulated adapter and a standard SIM holder. The second photograph shows a different SIM-holder arrangement and an installed Huawei ME906C module (P/N 55010061). These are configuration examples; the modem is not automatically included.
| Sales form | M.2 / NGFF module adapter with a Mini PCIe edge connection. Distinguish an unpopulated adapter from an assembly supplied with a modem. |
|---|---|
| Module / board identity | Order by complete module P/N and adapter revision, not by the generic 4G/5G title. Historical photos identify examples and do not establish current availability. |
| Kit contents | Specify board-only or board-plus-module, antennas, RF cables, SIM requirements, USB cable, enclosure and power accessories. Only the quotation establishes the included items. |
| Power and host | Obtain the board input rating, connector polarity, output rail, peak-current capability and host requirements before connection. |
| Network and performance | Determined by the installed module, firmware, antenna, SIM and network. An adapter does not add radio bands or certify operator acceptance. |
Integration checks
The earlier 2230/2242, Socket 1, PCIe-speed and universal-network statements were not established for the pictured assembly. Check keying, module dimensions, USB signal routing and SIM selection with the exact board. Do not assume an M.2 SSD or a PCIe-only WWAN device will work.
Check mechanical clearance, cooling, antenna connectors, host driver version and application software before deployment. Do not insert or remove a module or SIM under power unless the matched instructions explicitly permit the operation.
Technical references
M.2 to PCIE-4230.pdf is an undated two-page adapter instruction sheet. Its board outline, mounting points and SIM-holder layout correspond to the standard-holder example. It specifies 42 x 30 mm B-key modules and a 50 x 30 x 1.2 mm board. Confirm the actual drawing and host fit; the nano-SIM example is not proven to be the same revision.
Request the applicable board specification, hardware instructions and compliance documents during enquiry follow-up. Adjacent-board manuals, module marks and historical family certificates do not establish the certification or tested performance of the quoted assembly. Current status and applicable hardware/software revisions require confirmation.
Related adapters and enquiry
Send the intended module, host model/OS, destination country/operator, quantity, connection requirements and accessory list with your BOM enquiry. Browse the Datasheet Center for related module references.
