Description
Product identity and supplied items
EP06-E is an LTE Cat 6 modem in a Mini PCIe card form factor for embedded routers and gateways. Select the E regional variant and matching host wiring.
The retained photographs show EP06-E / EP06ELA-512-SGA. Antenna pigtails visible in some photographs are not automatically included in a module quotation.
Confirm the exact P/N, quantity, accessories and batch photographs with your quotation. Reference images do not confirm stock or supplied kit contents.
Technical reference and variant table
Quectel EP06 Series Hardware Design V1.6, 2023-09-28, and EP06 Series Specification V1.8 (Chinese, copyright 2022). These are versioned references; request the current matched release.
| Form and dimensions | Mini PCIe card, 30.0 x 50.95 x 3.95 mm; not an LGA bare module or complete router. |
|---|---|
| LTE bands | FDD B1/3/5/7/8/20/28/32; TDD B38/40/41. B32 is receive-only and used as a secondary component carrier in 2CA. |
| Legacy network bands | WCDMA B1/3/5/8. Confirm current operator service at the destination. |
| Peak data rates | LTE FDD up to 300 Mbps downlink / 50 Mbps uplink; TDD up to 226 / 28 Mbps. Actual throughput depends on network, aggregation combination and host. |
| Supply and temperature | 3.1-4.4 V, typical 3.3 V. Normal operating -35 to +75 C; extended -40 to +85 C. |
| Interfaces and options | USB 2.0/3.0 signals use the Mini PCIe connector. Mechanical fit does not establish PCIe-bus modem support. GNSS and voice depend on the selected configuration. |
Selection and integration
Verify USB pin assignments, host power capability, SIM routing, antenna connectors, firmware and supported carrier-aggregation combinations. EP06-A documentation and EPXX development-kit contents do not define an EP06-E shipment.
Documents and compliance
Specifications and hardware manuals are technical references. Independent approvals, declarations and operator acceptance records have their own model, firmware and integration limits. Request applicable documents for the quoted configuration and destination during enquiry follow-up; historical documents, packaging marks and family lists do not confirm current approval of a shipment or finished device.
Related products and enquiry
Send your complete P/N, target country and operator, host interface and quantity through a BOM enquiry. Browse the Datasheet Center for additional references. Quotation follow-up confirms supplied items, availability and lead time.
Retained image archive
Historical product and company images are preserved as references. Unrelated components or company artwork do not verify this model.
