Home > Product > 4G Module > SIMCom A7608SA-H LTE Cat 4 Bare Module
SIMCom A7608SA-H bare module with photographed P/N S2-10DPH-Z329D; serial, IMEI and QR code redacted

SIMCom A7608SA-H LTE Cat 4 Bare Module

A7608SA-H bare-module identification, labelled reference photograph and 2023-02 specification. Confirm the exact P/N, revision, bands and optional functions for your design.

Send Inquiry

Description

A7608SA-H LTE Cat 4 bare module

The SIMCom A7608SA-H is an LTE Cat 4 bare module for host-PCB integration. The locally held A7608SA-H specification describes LTE-TDD/LTE-FDD, HSPA+, GSM, GPRS and EDGE support, with theoretical LTE peak rates up to 150 Mbps downlink and 50 Mbps uplink.

Product identification and supply scope

  • Model: SIMCom A7608SA-H.
  • Form: bare LCC+LGA module; it requires a compatible host PCB and integration design.
  • Photographed ordering code: S2-10DPH-Z329D. This identifies the reference photograph only; the offered P/N, hardware revision, firmware and packing are confirmed for each inquiry.
  • Development boards, USB adapters, antennas, cables and SIM cards are separate items unless expressly included in the quotation.
SIMCom A7608SA-H bare module, photographed P/N S2-10DPH-Z329D; serial, IMEI and QR code redacted
Reference photograph labelled A7608SA-H and P/N S2-10DPH-Z329D. Device-specific identifiers are redacted. Confirm the supplied ordering code and revision in the quotation.

Technical reference

The following values are from the locally held A7608SA-H specification dated 2023-02. Confirm the current manufacturer document and the exact offered configuration before design release.

ItemA7608SA-H reference
Cellular categoryLTE Cat 4
Network modesLTE-TDD/LTE-FDD, HSPA+, GSM, GPRS and EDGE
LTE peak data rateUp to 150 Mbps downlink / 50 Mbps uplink; theoretical maxima
PackageLCC+LGA, 30.0 x 30.0 x 2.5 mm
Supply voltage3.4-4.2 V, 3.8 V typical
Operating temperature-40 to +85 degrees C
Interfaces and optionsUSB 2.0, UART, (U)SIM, PCM, analog audio, ADC, I2C and GPIO. The specification marks some functions, including GNSS, as optional; do not assume they are fitted or enabled.

Technical document and configuration check

Download the A7608SA-H specification (PDF, 2023-02 reference)

Before design release, compare the full P/N, pin assignment, target bands, firmware, optional functions and compliance requirements. Request current model-specific documentation for the intended market.

Select the correct module or board

A7608SA-H and A7608E-H are distinct model names. Bare modules, Mini PCIe assemblies and USB development boards have different mechanical and electrical requirements; direct substitution is not assumed.

Send your A7608SA-H requirements with the full P/N if known, destination country, operator, host design, quantity and required documents.

Related products