Description
Product identity and supplied items
L70-RL is a compact GPS L1 module for embedded positioning. Select the module, antenna and host interface for your design.
The retained illustrations read L70-RL and L70REL-M37. They show a bare module and reverse pads, not a current shipment inspection.
Confirm the exact P/N, quantity, accessories and batch photographs with your quotation. Retained images are references, not confirmation of current stock.
Technical reference and variant table
Quectel L70-R Series Hardware Design V3.0, 2016-05-31, printed pages 7-9. This version explicitly distinguishes L70-RL from L70-R.
| Receiver | GPS L1 C/A; 66 acquisition channels and 22 tracking channels. GLONASS and BeiDou are not listed for L70-RL. |
|---|---|
| Module | 18 pads; 10.1 x 9.7 x 2.5 mm; approximately 0.6 g. |
| Supply | 2.8-4.3 V, typical 3.3 V; follow the hardware guide for supply and backup circuits. |
| Host and output | UART, 4800-115200 bps; default 9600 bps. Up to 5 Hz position updates, default 1 Hz. |
| Temperature | Normal operation -40 to +85 C. |
| L70-R versus L70-RL | RL adds an embedded LNA. The manual lists RL acquisition/tracking sensitivity as -149/-167 dBm, measured without an external LNA. |
Selection and integration
Match pin assignments, antenna bias, power sequencing and firmware commands before replacing another GPS module. The historical 18 mA and 80 km statements are not design guarantees. Confirm operating mode and measurement conditions in the selected revision.
Documents and compliance
Specifications and hardware or protocol manuals are technical references, not independent certification documents. Applicable compliance evidence, current document revisions, firmware and market restrictions can be checked during enquiry follow-up. A logo or family declaration does not establish current approval for the quoted batch or finished system.
Related products and enquiry
- Quectel LC29D Dual-Band GNSS Module – Variant Selection
- u-blox ZED-F9P GNSS Module – 01B and 05B References
Send the full ordering code, application, accuracy target, host interface and quantity through a BOM enquiry. Find additional references in the Datasheet Center. Availability, lead time and supplied items are confirmed in the quotation.
