SIMCom A7608E-H LTE Cat 4 Bare Module

A7608E-H bare-module identification, reference photographs and revision guidance. Request the exact ordering code and technical documents for your design.

Description

A7608E-H bare module

The SIMCom A7608E-H is an LTE Cat 4 module for embedded cellular designs. This product page identifies the bare module and separates it from A7608SA-H, Mini PCIe assemblies and development boards.

Send your target country, operator, host design and quantity for selection support. The full ordering code, firmware, packing and quotation terms are confirmed for each inquiry.

Product identification and supply scope

  • Model: SIMCom A7608E-H.
  • Form: bare LCC+LGA module requiring a host PCB and integration design.
  • Photographed ordering code: S2-10F8L-Z33FM. This identifies the reference image, not a guaranteed supplied batch.
  • Development board, USB adapter, antennas, cables and SIM card are separate items unless expressly included in the quotation.

Technical reference and revision selection

The following values are from the locally held A7608E-H specification marked V: 2020.02. The available copy is a translated historical reference. Confirm the applicable original manufacturer document and hardware/firmware revision before design release.

ItemHistorical A7608E-H reference
Cellular categoryLTE Cat 4
LTE peak data rates150 Mbps downlink / 50 Mbps uplink; theoretical maxima
PackageLCC+LGA; 30.0 x 30.0 x 2.5 mm
Supply voltage3.4-4.2 V, 3.8 V typical
Operating temperature-40 to +85 degrees C
Band and optional-feature selectionConfirm the full P/N and current revision. The archived sheet marks B28 and GNSS as optional; do not assume they are fitted or enabled.

Reference photographs

SIMCom A7608E-H bare module, photographed P/N S2-10F8L-Z33FM
Reference photograph labelled A7608E-H and P/N S2-10F8L-Z33FM. The offered P/N, revision and packing are confirmed in the quotation.
A7608E-H bare module front and underside
Front and underside from the A7608E-H S2-10F8L-Z33FM image set.

Technical documents and compliance requests

  • A7608E-H specification, V: 2020.02: locally held translated reference.
  • A7600C-R2 & A7608x-H Series Hardware Design Manual, V1.01, 2021-06-22: locally held translated series reference; confirm sections applicable to A7608E-H.
  • Request the applicable original specification, hardware manual and firmware information with your full ordering code.
  • Request model-specific compliance documents for your target market. Logos on a photograph or certificate names in an index do not establish current certification of the offered configuration.

SIMCom technical document index lists A7608E-H document references. Index listings alone do not verify certificate scope or current validity.

Select the correct module or board

A7608E-H and A7608SA-H are distinct model names. Likewise, a bare module, Mini PCIe assembly and a USB development board require different electrical and mechanical checks. Compare the full part number, footprint, pin assignment, interfaces, firmware and target networks; direct replacement is not assumed.

For adjacent options, see A7608SA-H or browse the SIMCom module range.

Send your A7608E-H requirements. Include the complete P/N if known, destination country, operator, quantity and required documents.