Description
Product identity and supplied items
ZED-F9P is a multi-band GNSS receiver family for RTK positioning. Match the full type number, firmware, antenna and correction source before selecting a module.
The reel photograph is labeled ZED-F9P-01B-01. The existing downloadable datasheet is for ZED-F9P-05B; it is retained as a separate variant reference.
Confirm the exact P/N, quantity, accessories and batch photographs with your quotation. Retained images are references, not confirmation of current stock.
Technical reference and variant table
01B: UBX-17051259 R09, document-information date 24-Mar-2023, with revision-history date 15-Mar-2023. 05B: UBXDOC-963802114-12824 R02, 16-Oct-2024. These versioned specifications apply to different type numbers.
| 01B identity | ZED-F9P-01B-01; the R09 applicability table identifies HPG 1.12. The photograph does not establish the currently installed firmware. |
|---|---|
| 05B identity | R02 applies to ZED-F9P-05B-00 / HPG 1.51. The retained 05B PDF is not a specification for the photographed 01B. |
| RF configuration | 01B and 05B references cover GPS/QZSS L1/L2, GLONASS L1/L2, Galileo E1/E5b and BeiDou B1I/B2I. Do not transfer the newer 15B L1/L5 configuration to these variants. |
| Supply and temperature | 01B R09: VCC 2.7-3.6 V, typical 3.0 V; operation -40 to +85 C. Consult the matched manual for all other supply pins. |
| RTK and corrections | RTK operation requires compatible correction data and antenna integration. Centimeter-level results depend on the baseline, antenna, signal conditions and positioning mode. |
| Firmware-dependent functions | 05B R02 describes SPARTN/CLAS PPP-RTK support. This does not establish native SSR support for the photographed 01B firmware. |
Selection and integration
A bare module is separate from an evaluation board, antenna, base station and correction subscription. Compare the full ordering code, interface timing and firmware capabilities before migration. Current manufacturer listings include additional variants; listing changes alone do not prove stock or end-of-life status.
Documents and compliance
Retained original links: the local PDF below is the 05B R02 reference, not the photographed 01B.
Specifications and hardware or protocol manuals are technical references, not independent certification documents. Applicable compliance evidence, current document revisions, firmware and market restrictions can be checked during enquiry follow-up. A logo or family declaration does not establish current approval for the quoted batch or finished system.
Related products and enquiry
- Quectel LC29D Dual-Band GNSS Module – Variant Selection
- Quectel L70-RL GPS Module with Integrated LNA
Send the full ordering code, application, accuracy target, host interface and quantity through a BOM enquiry. Find additional references in the Datasheet Center. Availability, lead time and supplied items are confirmed in the quotation.
Retained image archive
Historical product and company images; unrelated components and company artwork do not verify this module or current stock.
